Saturday, November 24, 2007

How to dump into a pump

First things first you will need to communicate with the owner of the construction company. See how he wants it the answer sold be no less then a five slump this will just make it through must pumps. Talk with pump operator see what he need to do and let them both come to a reasonable slump and then you mix based on that. Prime Chute with water pull up to pump with someone guiding in don't hit the pump this with spark big problems in your life.

If you are the first truck start to dump slow so the cement can go through that pump with ease. after you get it going you can speed up. always watch the hopper don't over fill it by spilling on to the street.

Always sound horn as you run out but make sure you leave the hopper full at the pump stop there it' a little math not very hard.

Find out where you will wash out and leave no mess if you can.

No comments: